Corrugated Plate Separator
Product Details:
X
Product Description
Corrugated Plate Separator
Principle of Operation
The Enviro-Sep CPI Separator design is based on the principle of Stokes Law. CPI efficiency is determined by calculating the relationships between the flow-rate, oil and water specific gravity, temperature and oil content.
The Enviro-Sep Plate Separator receives process water through the inlet, into the primary inlet chamber, with solids settling to the bottom of this compartment and free oil forming an interface above the liquid level. Separated liquids pass through a removable distribution plate, creating an even flow distribution across the width of the plate pack for optimum flow characteristics.
The process water then undertakes a downward path through the plate pack, which consists of multiple corrugated plates designed to allow for oil droplet coalescence and separation. As the process flow downward through the pack, separated oil begins to agglomerate on the underside of each plate allowing for oil particle growth and their rise to a collection area at the oil water interface. A thick layer of oil forms this interface and is allowed to collect until it overflows an adjustable oil weir, into an oil bucket for removal.
Simultaneously, separated soils fall to the base of the pack and settle in the secondary solids chamber. The process water exits the bottom of the plate pack, rises upward and spills over a fixed water weir. On the backside of the water bucket there is a secondary oil compartment, which collects oil that may pass through the plate pack due to surges or upsets. Removal of this collected oil is a manual operation, opening a normally closed isolation valve. The gasketed cover, allows for a positive gas blanket pressure. A vent is provided for overpressure.
CPI Features and Benefits
Standard Features
Principle of Operation
The Enviro-Sep CPI Separator design is based on the principle of Stokes Law. CPI efficiency is determined by calculating the relationships between the flow-rate, oil and water specific gravity, temperature and oil content.
The Enviro-Sep Plate Separator receives process water through the inlet, into the primary inlet chamber, with solids settling to the bottom of this compartment and free oil forming an interface above the liquid level. Separated liquids pass through a removable distribution plate, creating an even flow distribution across the width of the plate pack for optimum flow characteristics.
The process water then undertakes a downward path through the plate pack, which consists of multiple corrugated plates designed to allow for oil droplet coalescence and separation. As the process flow downward through the pack, separated oil begins to agglomerate on the underside of each plate allowing for oil particle growth and their rise to a collection area at the oil water interface. A thick layer of oil forms this interface and is allowed to collect until it overflows an adjustable oil weir, into an oil bucket for removal.
Simultaneously, separated soils fall to the base of the pack and settle in the secondary solids chamber. The process water exits the bottom of the plate pack, rises upward and spills over a fixed water weir. On the backside of the water bucket there is a secondary oil compartment, which collects oil that may pass through the plate pack due to surges or upsets. Removal of this collected oil is a manual operation, opening a normally closed isolation valve. The gasketed cover, allows for a positive gas blanket pressure. A vent is provided for overpressure.
CPI Features and Benefits
Standard Features
- Enlarged Inlet Compartment for Free removal
- Primary and Secondary Solids Compartment for collection of solids with sloped bottom for solids removal
- Removable Distribution Plate
- Design pressure up to 5 psig
- Man-way in each solids compartment
- Adjustment Oil Weir
- No internal moving parts
- Stokes Law Design with consideration for Laminar Flow
- Quick Release Man-way over the adjustable weir and Plate Pack
- Plate Pack constructed of Fiberglass Reinforced Polyester (FRP)
- Rotatable Oil Skimmer Eliminating Vessel Entry for weir Adjustment
- Plate Pack Jetting Allowing Continuous On-Line Pack Cleaning
- Solids Cleaning Eductor
- Coalesing Pack
- Gas Sparging
- Induced Gas Flotation
- Plate Pack Constructed of Stainless Steel
| Model # | Flow Rate | Approximate Size | Approximate Weight | Pack Qty. | ||||
| GPM | BWPD | Length | Width | Height | Dry | Wet | ||
| ES-1 | 29 | 1,000 | 8' | 5' | 7' | 3,400 | 12,000 | 1/4 pk |
| ES-3 | 88 | 3,000 | 8' | 5' | 8' | 4,500 | 15,000 | 1/2 pk |
| ES-5 | 146 | 5,000 | 10' | 5' | 10' | 8,000 | 22,000 | 1 pk |
| ES-10 | 292 | 10,000 | 10' | 8'-6" | 10' | 14,000 | 35,000 | 2 pk |
| ES-15 | 438 | 15,000 | 12' | 8'-6" | 11'-6" | 17,500 | 51,000 | 3 pk |
| ES-20 | 583 | 20,000 | 12' | 8'-6" | 12' | 20,000 | 70,000 | 4 pk |
| ES-30 | 875 | 30,000 | 12' | 11'-6" | 12' | 28,700 | 98,000 | 6 pk |
| ES-40 | 1167 | 40,000 | 12' | 15' | 12' | 33,500 | 128,400 | 8 pk |
| ES-50 | 1458 | 50,000 | 12' | 18'-6" | 12' | 38,000 | 160,420 | 10 pk |
| ES-60 | 1750 | 60,000 | 12' | 22'-6" | 12' | 45,000 | 190,000 | 12 pk |
The above sizes are approximate and based on a .20 oil/water specific gravity differential, operating temperature of greater than 60 degrees and having a reynolds number of <500. Larger sizes are available upon request.
Weight based on 3/8" wall thickness
Other Products in 'Oil Separation Systems' category
Potential Engineering
GST : 27AAAFP0332N1ZB
GST : 27AAAFP0332N1ZB
D-5, Sidhpura Industrial Estate, Amrut Nagar, Off L.B.S. Marg, Ghatkopar (W), Mumbai - 400086, Maharashtra, India
|
|
|
 |
POTENTIAL ENGINEERING
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
